Power Wheels Battery Adapter Compatible with Milwaukee 18V Battery, 18V to 12V Step Down Power Converter with USB & Type C, XT60 Ports for RC Cars, DIY Projects, Car Appliance (1 Pack)

Makita-18v to 12v converter<br> <br> Battery Compatibility: Buck Converter is compatible with all Makita 18V lithium batteries, suitable for BL1815 BL1830 BL1840 BL1850 BL1860 BL1830B BL1850B BL1860B, etc. (Battery Not Included)<br> Step Down Converter: Input Voltage: DC 20V, Output Voltage: DC 12V, Output Current:10A Max; Output Power 120W Max. Our power wheel adapter is made of flame-retardant ABS material, adopted synchronous rectification technology,which can provide stable power conversion and good performance, make the most of your power supply.<br> USB + TYPE C Ports: Dual charging port design can support 2 devices charging at the same time. Ideal for powering small electronic devices such as mobile phones, tablets, MP4 players, digital cameras, game consoles, etc. 20V to 12V step-down converter can convert your batteries into reliable 12V vehicle power, bringing convenience to outdoor activities and automotive applications.<br> Cigarette Lighter &amp; XT60 Interface: This step down battery converter power wheels designed with a convenient cigarette lighter interface, making it effortless to connect and power for DIY and upgrade your power wheels, robots. The low voltage protection only controls the XT60 output, USB-A &amp; Type-C charging ports are always open.<br> Wide Application: With this battery converter, you can fully use of your batteries for DIY and upgrade your power wheels, RC cars, Car refrigerator, robots,portable welders or DIY projects as your needs. Let your old batteries no longer be idle, most uses of the adapter are endless.<br> Need Attention: This adapter is not a charger, it only outputs voltage and power directly from your battery. The red wire connects to the positive pole, and the black wire connects to the negative pole. Please remove the battery from the adapter when not used for a long time,in case of battery drain.<br> <br> <br> Blue-For Kobalt<br> <br> 【Compatible with 24v Battery】Our battery adapter is compatible with Kobalt 24v series lithium-ion batteries:KB624-03 KB524-03 KB424-03 KB224-03 KB124-03 lithium-ion batteries. Easily install and lock your battery, fits snugly with your battery. Please Note: Battery Not Included!!<br> 【Safety Protection】The adapter is equipped with a fuses to protect electrical equipment and batteries from current and overheating. If the fuse is damaged, you can replace it with the comes fuses replacement.The14 AWG high-quality silicone copper wire improves conductivity and safety, heat-resistant silicone wire can be used for high-power applications.The battery powered adapter is equipped with a switch to control battery current on or off.<br> 【Easy to Use】Slide in the battery and lock it firmly, do not touch the two wires when using it. If you do not use the adapter for a long time, please separate it from the battery.This adapter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive pole of the battery, and the black wire is connected to the negative pole of the battery.<br> 【Well-Designed】The power tool battery adapter is made of premium ABS plastic,which is durable and lightweight for long time use. It has excellent impact resistance, heat resistance and corrosion resistance,ideal for indoor and outdoor use. Package includes: 1 x drill battery adapter, 1 x 212 push-type quick wiring terminal, 3 x 30A fuse replacements.<br> 【Wide Application】 You can make full use of Kobalt 24v batteries for DIY and upgrade your power wheels, kids cars, toys, robots or portable welders according to actual usage needs. Make your old batteries no longer idle, the uses of the adapter are endless. This adapter will surely allow you to quickly and safely upgrade your power wheels and enjoy the beauty of DIY, allowing you to enjoy entertainment with your children.<br> <br> <br> Blue-For Makita<br> <br> Perfectly Compatible: The power wheel adapter is only compatible with Makita 18V lithium battery, such as BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 etc.(Batteries not included, you need to buy it yourself)<br> Easy to Use: Slide in the battery and hear a "click" for a secure lock. The red wire connects to the positive terminal of the battery and the black wire connects to the negative terminal of the battery. The battery adapter has 4 screw holes for fixing with screws, it is easily attached to the power wheels. Please remove the battery from battery power adapter when no longer use, this may damage your battery.<br> Premium Material: Our power battery converter is made of durable ABS plastic, injection molded, scratch-resistant, moisture-proof and corrosion-resistant, perfect for indoor and outdoor use.<br> Wide Range of Use: The power wheel adapter is fitted with 12.5" 14 gauge wire for high power batteries, and the terminal blocks allow you to quickly and accurately connect the adapter to your device, help to upgrade your power wheel, RC toys, car appliance, robot or DIY projects with confidence.<br> Important Note: This converter is not a charger, it only outputs voltage and power directly from the battery, please make sure the positive and negative wires of the device correspond to the positive and negative wires of the adapter when using it.<br> <br> <br> Green-For RYOBI 40V Battery:<br> <br> Battery Compatible: The power wheel adapter is compatible with Ryobi 40V lithium batteries, for OP4050A OP4060A OP4015 OP40201 OP40261 OP4030 OP40301 OP4040 OP40401 OP4050 OP40501 OP40601 OP40602 batteries. Please note: Battery Not Included!<br> Easy to Use: Slide in the battery and hear a "click" for a secure lock. The red wire connects to the positive terminal of the battery and the black wire connects to the negative terminal of the battery. Please remove the battery from battery power adapter when no longer use, this may damage your battery.<br> Safety Protection: The adapter is equipped with a 30Amp fuses with waterproof rubber cap to protect electrical equipment and batteries from current and overheating. If the fuse is damaged, you can replace it with the comes fuses replacement. The14 AWG high-quality silicone copper wire improves conductivity and safety, heat-resistant silicone wire can be used for high-power applications. The battery powered adapter is equipped with a switch to control battery current on or off.<br> Wide Range of Use: The power wheel adapter is fitted with 12.5" 14 gauge wire for high power batteries, and the terminal blocks allow you to quickly and accurately connect the adapter to your device, help to upgrade your power wheel, RC toys, car appliance, robot or DIY projects with confidence.<br> Important Note: This converter is not a charger, it only outputs voltage and power directly from the battery, please make sure the positive and negative wires of the device correspond to the positive and negative wires of the adapter when using it.<br> <br> <br> Green-For Greenworks 40v:<br> <br> Battery Compatible: The power wheel adapter is compatible Greenworks 40V G-MAX 29462 29252 20202 22262 25312 25322 20642 22272 27062 21242 ect Lithium-Ion batteries. Please note: Battery Not Included!<br> Easy to Use: Slide in the battery and hear a "click" for a secure lock. The red wire connects to the positive terminal of the battery and the black wire connects to the negative terminal of the battery. Please remove the battery from battery power adapter when no longer use, this may damage your battery.<br> Safety Protection: The adapter is equipped with a 30Amp fuses with waterproof rubber cap to protect electrical equipment and batteries from current and overheating. If the fuse is damaged, you can replace it with the comes fuses replacement.The14 AWG high-quality silicone copper wire improves conductivity and safety, heat-resistant silicone wire can be used for high-power applications.The battery powered adapter is equipped with a switch to control battery current on or off.<br> Wide Range of Use: The power wheel adapter is fitted with 12.5" 14 gauge wire for high power batteries, and the terminal blocks allow you to quickly and accurately connect the adapter to your device, help to upgrade your power wheel, RC toys, car appliance, robot or DIY projects with confidence.<br> Important Note: This converter is not a charger, it only outputs voltage and power directly from the battery, please make sure the positive and negative wires of the device correspond to the positive and negative wires of the adapter when using it.<br> <br> <br> Green-For Ryobi 18v:<br> <br> Battery Compatible: The power wheel adapter is compatible with Ryobi 40V lithium batteries, for OP4050A OP4060A OP4015 OP40201 OP40261 OP4030 OP40301 OP4040 OP40401 OP4050 OP40501 OP40601 OP40602 batteries. Please note: Battery Not Included!<br> Easy to Use: Slide in the battery and hear a "click" for a secure lock. The red wire connects to the positive terminal of the battery and the black wire connects to the negative terminal of the battery. Please remove the battery from battery power adapter when no longer use, this may damage your battery.<br> Safety Protection: The adapter is equipped with a 30Amp fuses with waterproof rubber cap to protect electrical equipment and batteries from current and overheating. If the fuse is damaged, you can replace it with the comes fuses replacement. The14 AWG high-quality silicone copper wire improves conductivity and safety, heat-resistant silicone wire can be used for high-power applications. The battery powered adapter is equipped with a switch to control battery current on or off.<br> Wide Range of Use: The power wheel adapter is fitted with 12.5" 14 gauge wire for high power batteries, and the terminal blocks allow you to quickly and accurately connect the adapter to your device, help to upgrade your power wheel, RC toys, car appliance, robot or DIY projects with confidence.<br> Important Note: This converter is not a charger, it only outputs voltage and power directly from the battery, please make sure the positive and negative wires of the device correspond to the positive and negative wires of the adapter when using it.<br> <br> <br> <br> For Craftsman V20 Battery- 18v to 12v converter <br> <br> Battery Compatibility: This buck battery adapter is compatible with Craftsman 20V series lithium-ion batteries, including model CMCB201 CMCB202 CMCB204 CMCB205 CMCB206 CMCB209 CMCD700C1 CMCS500B etc. Easily install and fits snugly with your battery. Please Note: Battery Not Included!<br> Step Down Converter: Input Voltage: DC 20V, Output Voltage: DC 12V, Output Current:10A Max; Output Power 120W Max. Our power wheel adapter is made of flame-retardant ABS material, adopted synchronous rectification technology,which can provide stable power conversion and good performance, make the most of your power supply.<br> USB + TYPE C Ports: Dual charging port design can support 2 devices charging at the same time. Ideal for powering small electronic devices such as mobile phones, tablets, MP4 players, digital cameras, game consoles, etc. 20V to 12V step-down converter can convert your batteries into reliable 12V vehicle power, bringing convenience to outdoor activities and automotive applications.<br> Cigarette Lighter &amp; XT60 Interface: This step down battery converter power wheels designed with a convenient cigarette lighter interface, making it effortless to connect and power for DIY and upgrade your power wheels, robots. The low voltage protection only controls the XT60 output, USB-A &amp; Type-C charging ports are always open.<br> Wide Application: With this battery converter, you can fully use of your batteries for DIY and upgrade your power wheels, kids cars, toys, robots, portable welders as your needs. Let your old batteries no longer be idle, most uses of the adapter are endless.<br> Need Attention: This adapter is not a charger, it only outputs voltage and power directly from your battery. The red wire connects to the positive pole, and the black wire connects to the negative pole. Please remove the battery from the adapter when not used for a long time,in case of battery drain.<br> <br> <br> Red-For Milwaukee 18V Battery 20v to 12v converter:<br> <br> Battery Compatibility: Buck Converter is compatible with all milwaukee 18v m18 lithium ion batteries, 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48- 11-1840, 48-11-1841, 48-11-1850, etc. (Battery Not Included)<br> Step Down Converter: Input Voltage: DC 20V, Output Voltage: DC 12V, Output Current:10A Max; Output Power 120W Max. Our power wheel adapter is made of flame-retardant ABS material, adopted synchronous rectification technology,which can provide stable power conversion and good performance, make the most of your power supply.<br> USB + TYPE C Ports: Dual charging port design can support 2 devices charging at the same time. Ideal for powering small electronic devices such as mobile phones, tablets, MP4 players, digital cameras, game consoles, etc. 18V to 12V step-down converter can convert your batteries into reliable 12V vehicle power, bringing convenience to outdoor activities and automotive applications.<br> Cigarette Lighter &amp; XT60 Interface: This step down battery converter power wheels designed with a convenient cigarette lighter interface, making it effortless to connect and power for DIY and upgrade your power wheels, robots. The low voltage protection only controls the XT60 output, USB-A &amp; Type-C charging ports are always open.<br> Wide Application: With this battery converter, you can fully use of your batteries for DIY and upgrade your power wheels, kids cars, toys, robots, portable welders as your needs. Let your old batteries no longer be idle, most uses of the adapter are endless.<br> <br> <br> <br> Red-For Craftsman：<br> 【Compatible with 20v Battery】Our battery adapter is compatible with Craftsman 20V series lithium-ion batteries, including model CMCB201 CMCB202 CMCB204 CMCB205 CMCB206 CMCB209 CMCD700C1 CMCS500B etc.Easily install and lock your battery, fits snugly with your battery.Please Note: Battery Not Included!!<br> 【Safety Protection】The adapter is equipped with a fuses to protect electrical equipment and batteries from current and overheating. If the fuse is damaged, you can replace it with the comes fuses replacement.The14 AWG high-quality silicone copper wire improves conductivity and safety, heat-resistant silicone wire can be used for high-power applications.The battery powered adapter is equipped with a switch to control battery current on or off.<br> 【Easy to Use】Slide in the battery and lock it firmly, do not touch the two wires when using it. If you do not use the adapter for a long time, please separate it from the battery.This adapter is not a charger, it only outputs the voltage and power directly from your battery. The red wire is connected to the positive pole of the battery, and the black wire is connected to the negative pole of the battery.<br> 【Well-Designed】The power tool battery adapter is made of premium ABS plastic,which is durable and lightweight for long time use. It has excellent impact resistance, heat resistance and corrosion resistance,ideal for indoor and outdoor use. Package includes: 1 x drill battery adapter, 1 x 212 push-type quick wiring terminal, 3 x 30A fuse replacements.<br> 【Wide Application】You can make full use of Craftsman 20V batteries for DIY and upgrade your power wheels, kids cars, toys, robots or portable welders according to actual usage needs. Make your old batteries no longer idle, uses of the adapter are endless.This battery conversion adapter will surely allow you to quickly and safely upgrade your power wheels and enjoy the beauty of DIY, allowing you to enjoy entertainment with your children.<br> <br> <br> Yellow-For Dewalt Battery 20v to 12v converter:<br> Battery Compatibility: Buck Converter is compatible with Dewalt 18V/20V MAX lithium batteries, suitable for DCB181 DCB182 DCB206 DCB205 DCB204 DCB200 DCB203 DCB205-2 DCB204-2 DCB206-2 etc. (Battery Not Included)<br> Step Down Converter: Input Voltage: DC 20V, Output Voltage: DC 12V, Output Current:10A Max; Output Power 120W Max. Our power wheel adapter is made of flame-retardant ABS material, adopted synchronous rectification technology,which can provide stable power conversion and good performance, make the most of your power supply.<br> USB + TYPE C Ports: Dual charging port design can support 2 devices charging at the same time. Ideal for powering small electronic devices such as mobile phones, tablets, MP4 players, digital cameras, game consoles, etc. 20V to 12V step-down converter can convert your batteries into reliable 12V vehicle power, bringing convenience to outdoor activities and automotive applications.<br> Cigarette Lighter &amp; XT60 Interface: This step down battery converter power wheels designed with a convenient cigarette lighter interface, making it effortless to connect and power for DIY and upgrade your power wheels, robots. The low voltage protection only controls the XT60 output, USB-A &amp; Type-C charging ports are always open.<br> Wide Application: With this battery converter, you can fully use of your batteries for DIY and upgrade your power wheels, RC cars, Car refrigerator, robots,portable welders or DIY projects as your needs. Let your old batteries no longer be idle, most uses of the adapter are endless.<br> Need Attention: This adapter is not a charger, it only outputs voltage and power directly from your battery. The red wire connects to the positive pole, and the black wire connects to the negative pole. Please remove the battery from the adapter when not used for a long time,in case of battery drain.<br> <br>

• Battery Compatible: The power wheel adapter is compatible with Ryobi 40V lithium batteries, for OP4050A OP4060A OP4015 OP40201 OP40261 OP4030 OP40301 OP4040 OP40401 OP4050 OP40501 OP40601 OP40602 batteries.Please note: Battery Not Included!
• Battery Compatibility: Buck Converter is compatible with all milwaukee 18v m18 lithium ion batteries, 48-11-1811, 48-11-1815, 48-11-1820, 48-11-1822, 48-11-1828, 48- 11-1840, 48-11-1841, 48-11-1850, etc.(Battery Not Included)
• 【Compatible with 20v Battery】Our battery adapter is compatible with Craftsman 20V series lithium-ion batteries, including model CMCB201 CMCB202 CMCB204 CMCB205 CMCB206 CMCB209 CMCD700C1 CMCS500B etc.Easily install and lock your battery, fits snugly with your battery.Please Note: Battery Not Included!!
• Battery Compatibility: Buck Converter is compatible with Dewalt 18V/20V MAX lithium batteries, suitable for DCB181 DCB182 DCB206 DCB205 DCB204 DCB200 DCB203 DCB205-2 DCB204-2 DCB206-2 etc.(Battery Not Included)
• Battery Compatible: The power wheel adapter is compatible Greenworks 40V G-MAX 29462 29252 20202 22262 25312 25322 20642 22272 27062 21242 ect Lithium-Ion batteries.Please note: Battery Not Included!
• Perfectly Compatible: The power wheel adapter is only compatible with Makita 18V lithium battery, such as BL1830 BL1840 BL1850 BL1860 BL1840B BL1850B BL1860B BL1820 etc. (Batteries not included, you need to buy it yourself)